Home page About us Products Where we are Contact us

Drilling tools

Tricones Rock bits
PDC bits
Drag bits
Ad claw bits
Dth hammers
Dht bits for DTH hammers
Atlas Copco Hammers
Drive Plates Bits
Eccentric system
Grinders and accessories for button bit regrinding
Line lubricator for DTH hammers
Drilling specialties
Tool joint grease compounds
Geological tools and instruments
Polymers and special products for drilling activities
Mud pumps new & refurbished
Handling tools
Blow out preventors and Diverters
Inflatable packers
Continuous slot wedge-wire screens for water wells
PVC Pipes and Filters
Drifting, Tunneling and Mining Equipment

Custom built

Supply company

Environment division


Drilling tools

 

Grout pump "AMCI"

PUMP TYPE : Dual acting Plunger Pump, weight 265 lbs., (stand mounted 60" x 39"x18"). Hammer unions allows you to disassemble entire pump in less than 3 minutes.

HYDRAULICS: 2 1/2" Bore Heat-Treated Hydraulic Cylinder, 9" stroke, hydraulic switching valve (no battery or electricity needed).

FLUID END: 5" Replaceable Super liners and Single Acting Pistons, Self Priming, 2" Suction and 1" Discharge or optional 2" Discharge. Easily pumps grout, water, mud or cement. Will produce 48 GPM with hydraulics of 10 GPM. Fluid end has been tested at 800 PSI.

Liters Per Minute (LPM) of hydraulic fluid to power pump
Liters of Group per Minute Liters of Hydraulic fluid To Operate Grout Pump Liters of Grout per Minute Liters of Hydraulic fluid To Operate Grout Pump
5 100/200 24 21/42
10 100/200 48 21/42
15 100/200 72 21/42
20 100/200 96 21/42
30 100/200 144 21/42
40 100/200 192 21/42
50 100/200 240 21/42
60 100/200 288 21/42
70 100/200 336 21/42
75 100/200 360 21/42

At Maximum fluid pressure of 312 PSI with Maximum of Hydraulic pressure of 1500 PSI.
At Maximum fluid pressure of 625 PSI with Maximum of Hydraulic pressure of 3000 PSI.


7 " x 10" HYDRAULIC GROUT PUMP

7½ x 10 Hydraulic Grout pump w/7½” Liner & Piston, w/FC standard valve & seat.
Approximate dimensions 84" Long x 36" High 62" High w/surge chambers x 31" Wide (base width)
Approximate weight 1,000#

Pump Stroke Amount of Hydraulic Fluid Amount of Fluid End GPM
W/3" Hydraulic Cylinder
40 20 GPM 152 GPM
60 30 GPM 228 GPM
70 35 GPM 266 GPM
W/3 " Hydraulic Cylinder
40 27.2 GPM 152 GPM
60 40.8 GPM 228 GPM
70 47.6 GPM 266 GPM
W/4" Hydraulic Cylinder
40 37.6 GPM 152 GPM
50 47.0 GPM 190 GPM
60 56.4 GPM 228 GPM
70 65.8 GPM 266 GPM

Ratio of Hydraulic Pressure Hydraulic Pressure Fluid End Pressure
8.3 1500 PSI on 3" Cylinder 180.7
5.62 1500 PSI on 3 " Cylinder 266.9
4.09 1500 PSI on 4" Cylinder 366.74
 

info@adriatech.com

Home page | About us | Products | Where we are | Contact us

 
   

Copyright© Adriatech Europe